Hyperdesmo ADY-2K Neutral®

       
 

2K-Polyurethane-top coat / coating, solventless, lightstable,
aliphatic, UV-stable, can be pigmented, glossy

   
 
 

HYPERDESMO®-ADY-2K is a two-component, 100% solids, fully aliphatic polyurethane top-coat / paint, which, once cured, produces a tough membrane with, specifically, high resistance to abrasion and chemicals.
It contains high quality inorganic fillers and pigments, which result in excellent hiding power in one coat only and, hence, significantly reduced consumption and application time. Further, it is thixotopic, which also makes it highly suitable for application on vertical substrates in, again, just one coat. Last but not least, due to its 100% aliphatic backbone, there is no yellowing as a result of direct exposure to sunlight.
Apply with roller or rubber squeegee in one or two coats. Maximum total consumption: 0.5 kg/m².

Maximum total consumption per layer: 300 - 500gr /m²

 

Recommended as:

pigmented protection and UV-resistant top coat on:

  • Polyurethane- or Epoxy floorings (Hyperfloor, Kepipox)

  • fast-curing, sprayed Polyurea (Hyperdesmo- Polyurea-2K-HC)

Shelf Life:
Can be kept for 12 months minimum in the original unopened pails in dry places and at temperatures of 5-25°C. Once opened, use as soon as possible.

 

Packaging:

4,5kg Pails (A 1,5kg + B 3kg)

 

Hyperdesmo ADY 2K Neutral

   

Features & Benefits

  • solventless, 100% solids

  • aliphatic, no yellowing caused by UV exposure

  • fast curing, long pot-life

  • strong and uniform adhesion over the entire surface

  • unsurpassed hiding power

  • Excellent resistance to heat, it will not yellow, peel or soften up to 80°C

  • Very high resistance to mechanical stresses (high tensile strength and abrasion resistance).

  • Can be easily pigmented with Hyperdesmo pigments

 

Mixing ratio:
2:1

 

Application:

Stir comp. B thoroughly before mixing with comp.
A (the resin). Mixing can either be done manually
or with a low speed (300 rpm) mixer.

Let the mix stand for approximately
10 minutes (this is a necessary induction
time) and then proceed to a second round of
stirring.

 

 

Hyperdesmo ADY-2K Neutral has a long pot life of more than 30 minutes and a short curing time of 3 to 4 hrs.

For further details please refer to the

 

Technical Data Sheet:

Adobe PDF file icon 32x32