Hyperglue TX 40®


One Component, Trowel Grade Polyurethane Based Elastic Adhesive


HYPERGLUE-TX40® is a one component solvent-less, moisture curing polyurethane adhesive. The adhesive combines high elasticity and excellent mechanical properties, therefore allowing planks of wood to expand and contract without damage. It is suitable for bonding a broad range of parquet and wooden floors onto various indoor substrates.



It can be successfully applied on: Properly prepared, structurally sound Concrete, cement boards, chip boards, plywood and hard wood. For direct application on ceramic tiles Alchimica recommends using Primer –T. Please see technical data sheet for application details of the primer. For on-grade sub floors, in order to protect from moisture it is recommended to use primer Aquadur or Epoxy Resin 21 clear. This primer may also be used in applications on dry gypsum or any substrate to improve


Recommended for:

Bonding of: 

  • Stab Parquet

  • Laminated and pre-finished parquet

  • Mosaic Parquet

  • Industrial Parquet

  • Chip Boards

  • Exotic Timber

  • Industrial Floors


Shelf Life:

Can be kept for 12 months minimum in the original unopened pails in dry places and at temperatures of 5-25°C. Once opened, use as soon as possible.



15kg pails


Hyperglue TX40 250



Features & Benefits

  • Excellent adhesion

  • One component

  • Solvent and water free

  • Easy Trowel Application

  • Permanently Flexible

  • Suitable for under-floor heating

  • Sound dampening effect

  • fast-curing 



For further details please refer to the

Technical Data Sheet:

Adobe PDF file icon 32x32