Hyperdesmo W®

       
 

Two-Component, Solvent-less, Polyurethane Coating for Flashing and Tank Waterproofing & Protection.

   
 
 

HYPERDESMO®-2K-W is a two-component, solvent-free, thixotropic coating, based on high quality elastomeric polyurethane resins. After polymerization it produces a strong, elastic, hydrophobic membrane suitable for waterproofing and protection. It is recommended for waterproofing of water tanks. It has been
certified for use in potable water tanks (more details available on request from our technical department). Apply with roller in two coats with consumption per coat of 700 gr/m². On the tank floor, a single
coat of 1400 gr/m² is sufficient. On tank surfaces with direct exposure to sunlight, HYPERDESMO®-2K-W will discolor. This is purely visual, it does not affect the performance of the product.

 

Certified quality, environmental and occupational health & safety management systems: ISO 9001/14001 & OHSAS 18001.

 

Recommended for:

Waterproofing and protection of:

• Water tanks made of concrete, steel or other material,

• prefabricated concrete tanks,

• drinking water tanks,
• tanks with wall movement due to expansion and contraction.

 

Shelf Life:

Can be kept for 12 months minimum in the original unopened pails in dry places and at temperatures of 5-25°C. Once opened, use as soon as possible.

 

Packaging:
9kg (A 1,6kg : B 7,5kg)
24kg (A 4kg : B 20kg)

   

Features & Benefits

  • Excellent adhesion on almost any type of surface.

  • Being solvent-less, it can easily be applied in closed spaces.

  • Extremely hydrophobic and hydrolysis resistant.

  • Wide working temperature range: -40°C to 90°C

  • Good chemical resistance

  • Certified for otable water tanks, in accordance with the latest European Union requirements.

  • The best value, performance-to-cost, solution
    for water tanks.

  • Special primers, topcoats and coloring pastes
    are available.

 

Mixing ratio:
1 : 5

 

Apply with roller in two coats with consumption per coat of 700 gr/m². On the tank floor, a single coat of 1400 gr/m² is sufficient.

 

For information about airless spray application please contact our tech department. 

Pot life:

approximately 30 minutes at 20°C.

 

For further details please refer to the 

Technical Data Sheet:

Adobe PDF file icon 32x32