Hyperdesmo FC®


Fast-curing, polyurethane liquid membrane for waterproofing & protection.  


HYPERDESMO®-FC is a one component
polyurethane fluid which cures with the humidity in the atmosphere. Due to its unique formulation, it cures rapidly to form a completely defect free membrane with excellent mechanical and
elasticity properties, as well as excellent adhesion
to different surfaces. It is a high solids material
with low viscosity which can be thinned with
SOLVENT-01, if necessary. This product is ideal
for use during the winter months or in climates
with relatively low humidity.


It is based on pure elastomeric hydrophobic
polyurethane resin plus special inorganic fillers,
which result in excellent mechanical, chemical,
thermal, UV and natural element resistance


Apply with brush, roller or airless spraying in two
coats. Minimum total consumption: 1.2-1.5


Recommended for:

waterproofing and protection of:

  • gypsum and cement boards

  • polyurethane insulation foams

  • verandas and balconies

  • roofs

  • light roofing made of metal or fibrous cement

  • light roofing made of metal or fibrous cement

  • asphalt membranes

  • EPDM membranes 

Shelf Life:

Can be kept for 12 months minimum in the original unopened pails in dry places and at temperatures of 5-25°C. Once opened, use as soon as possible.


1kg, 6kg, 15kg, 25kg pails

and 200kg barrels


Hyperdesmo Classic


Features & Benefits

  • Fast-curing

  • no thinning is required but SOLVENT-01 may be used

  • Excellent weather and UV resistance. The white colour reflects much of the solar energy and so reduces the internal temperature of buildings considerably.

  • Excellent thermal resistance, the product never turns soft. Max service temperature 80°C, max shock temperature 200° C

  • Resistance in the cold: The film remains elastic even down to -40° C.

  • Excellent mechanical properties, high tensile and tear strength, high abrasion resistance

  • Good chemical resistance

  • not toxic after curing

  • Moisture vapor transmission: The film breathes so there is no accumulation of humidity under the coat



Apply the material with roller or brush in two, at
least, coats. Do not exceed 48 hours between
coats. If more time passes (for example more
than 4 days) or if you are unsure of the interlayer
adhesion, use Universal-Primer-2K-4060.


Certified according to ETAG 005

eota 50x18 DIBT 50x31


For further details please refer to the


Technical Data Sheet:

Adobe PDF file icon 32x32