Hyperdesmo ADY-2K®

       
 

2K-Polyurethan-Bindemittel & Versiegelung, lösemittelfrei, lichtecht,
aliphatisch, UV-stabil, transparent, glänzend, für Steinteppiche im Innenbereich

   
 
 

HYPERDESMO®-ADY-2K is a two-component, 100% solids, fully aliphatic polyurethane top-coat / paint, which, once cured, produces a tough membrane with, specifically, high resistance to abrasion and chemicals.
It contains high quality inorganic fillers and pigments, which result in excellent hiding power in one coat only and, hence, significantly reduced consumption and application time. Further, it is thixotopic, which also makes it highly suitable for application on vertical substrates in, again, just one coat. Last but not least, due to its 100% aliphatic backbone, there is no yellowing as a result of direct exposure to sunlight.
Apply with roller or rubber squeegee in one or two coats. Maximum total consumption: 0.5 kg/m2.

 

Use as protective & UV resistant top-coat on:
- Polyurethane flooring systems (HYPERFLOOR® System),
- hot cure, spray applied polyurea (HYPERDESMO®-POLYUREA-2K-HC).
Also, for use as a UV resistant polyurethane paint for floors and swimming pools or as binder for stone carpet applications with a 5-6% ratio measured by weight of the stones.

 

Shelf Life:
Can be kept for 12 months minimum in the original unopened pails in dry places and at temperatures of 5-25°C. Once opened, use as soon as possible.

 

Packaging:
11kg Pails (A 5kg + B 6kg)

5,5kg Pails (A 2,5kg + B 3kg)

 

Hyperdesmo ADY 2K

   

Features & Benefits

  • solventless, 100% solids

  • aliphatic, no yellowing caused by UV-light exposure

  • fast curing, long pot life

  • strong and uniform adhesion over the entire surface

  • unsurpassed hiding power

  • Excellent resistance to heat, it will not yellow, peel or soften up to 80°C

  • Very high resistance to mechanical stresses (high tensile strength and abrasion resistance).

 

Mixing Ratio:
A 0,83 : B 1,0

 

Application:

Stir comp. B thoroughly before mixing with comp.
A (the resin). Mixing can either be done manually
or with a low speed (300 rpm) mixer. Let the mix stand for approximately
10 minutes (this is a necessary induction
time) and then proceed to a second round of
stirring.

HYPERDESMO®-ADY-2K has a relatively long pot life of more than 30 minutes and a relatively short drying time of 3-4 hours. To prolong its pot life 

either empty the mix directly on the application surface or in a wide and shallow container.

 

For further details please refer to the 

 

Technical Data Sheet:

Adobe PDF file icon 32x32